TECO F510 series - 6.2 Reference from External Analog Signal (0-10 V; 4-20 mA)

6-2
6.2 Reference from External Analog Signal (0-10V / 4-20mA)
Analog Reference: 0 – 10 V (Setting 00-05 = 1)
(S+) (S-) S1 S3 S5 24V +10V MT GND GND AI1 AI2
E
24VG S2 S4 S6 F1 F2 PO PI AO1 AO2
E
Connect shield to
control ground terminal
0 – 10 V
+
-
Analog
Input AI1
Common/0V, GND
Control Terminals /
User Terminals
Analog Reference: Potentiometer / Speed Pot (Setting 00-05 = 1)
(S+) (S-) S1 S3 S5 24V +10V MT GND GND AI1 AI2
E
24VG S2 S4 S6 F1 F2 PO PI AO1 AO2
E
Control Terminals /
User Terminals
Connect shield to
control ground terminal
Potentiometer
1 ~ 5K Ohm
Common/0V, GND
Analog
Input AI1