TECO F510 series - Chapter 4 Keypad and Programming Functions; 4.1 LED Keypad

4-1
Chapter 4 Keypad and Programming Functions
4.1 LED Keypad
4.1.1 Keypad Display and Keys
DISPLAY Description
5 Digit LED Display Monitor inverter signals, view / edit parameters, fault / alarm display.
LED INDICATORS
FAULT LED ON when a fault or alarm is active.
FWD LED ON when inverter is running in forward direction, flashing when stopping.
REV LED On when inverter is running in reverse direction, flashing when stopping.
SEQ
LED ON when RUN command is from the external control terminals or from
serial communication.
REF
LED ON when Frequency Reference command is from the external control
terminals or from serial communication.