TECO F510 series - 11.12 I;O expansion card

11-48
11.12 I/O expansion card
11.12.1 Hardware and data structure
This product is an I/O expansion module; it allows performing of I/O expansion functions through
the SPI bus. Used with the TECO A510s/F510 AC motor driver (hereinafter referred to as a driver).
11.12.2 Product specifications
I/O ports
Item Specifications
Connector TB1 7 external contacts
AC motor driver port
Item Specifications
Connector Control board CN2 connector/CN5 connector
Transmission
method
SPI high speed communication
Terminal
functions
TB1 7 external contacts
11.12.3 Installation instructions
Contact description
Type
Terminal Terminal functions Signal level
Analog
input
signal
AI3
Main speed command input; SW7 can be used to switch
between voltage or current input
(-10~10V)/(4-20mA)
-10V to +10V,
(Input resistance 500KΩ)
4 to 20 mA
(Input resistance: 500Ω)
(12bit resolution)
GND Analog signal shared terminal
-
---