TECO F510 series - Page 176

4-87
01 V/F Pattern
00 Basic Func.
Group
[ Main Screen ] [ Main Menu] [ Subdirectroy] [ READ/ ENTER ]
1
2
1
2
ENTER
ENTER
Monitor
Freq Ref
12 – 16 = 000 . 00Hz
----------------------------------
12-17 = 000.00Hz
12-18 = 0000.0A
DSP
FUN
02 Motor Parameter
READ
FUN
DSP
PARA 00
-41 User P0
-42 User P1
-43 User P2
PARA 00
-54 User P13
-55 User P14
-56 User P15
DSP
FUN
DSP
FUN
DSP
FUN
FUN
DSP
READ
Edit 00-41
User P0
---------------------------------------
01-00 V/F Pattern. Sel
(01-00–24-06)
PARA 00
-00 Control Method
-01 Motor Direction
-02 RUN Source
User Parameter Run Mode Structures
A. Define Parameter Group 0~24 as user parameters except parameter 00-00 and 00-41~00-56.
Note: User level (13-06=1) can be set by one or more parameters in the user parameters of 00-41 ~
00-56.
Step LCD Display Descriptions
11
Edit 00-41
S1 Function Sel
06 FJOG
(00~57)
< 00 > < 03-00 >
Press ▲ (Up) / ▼ (Down) key to change the setting value to 2. Use
(READ/ ENTER) key to save the setting value.
When the selected setting value does not flash again, the setting
value will be saved to 00-41 and 03-00 simultaneously.
12
Monitor
Freq Ref
12-16=000.00Hz
---------------------------------------
12-17=000.00Hz
12-18=0000.0A
Press (DSP/FUN) key to the display of main screen.
* If users do not press (DSP/ FUN) key in one minute, the screen will
automatically display the monitor mode shown as the left figure.
The automatically return time can be set via 16-06.