TECO F510 series - Page 3

II
Chapter 4 Keypad and Programming Functions .......................................................... 4-1
4.1 LED Keypad ............................................................................................................ 4-1
4.1.1 Keypad Display and Keys ............................................................................... 4-1
4.1.2 Seven Segment Display Description ............................................................... 4-3
4.1.3 LED Indicator Description ............................................................................... 4-5
4.1.4 Power-up Monitor ........................................................................................... 4-7
4.1.5 Modifying Parameters/ Set Frequency Reference .......................................... 4-8
4.1.6 Operation Control ......................................................................................... 4-10
4.2 LCD keypad ........................................................................................................... 4-11
4.2.1 Keypad Display and Keys ............................................................................ 4-11
4.2.2 Keypad Menu Structure .............................................................................. 4-13
4.3 Parameters ............ ……………………………………………………………………..4-17
4.4 Description of Parameters .................................................................................... 4-70
4.5 Built-in PLC Function .......................................................................................... 4-309
4.5.1 Basic Command ......................................................................................... 4-309
4.5.2 Basic Command Function ........................................................................... 4-310
4.5.3 Application Functions .................................................................................. 4-311
4.6 Modbus Protocol Descriptions ........................................................................... 4-319
4.6.1 Communication Connection and Data Frame ............................................. 4-319
4.6.2 Register and Data Format .......................................................................... 4-323
4.7 BacNET Protocol Descriptions .......................................................................... 4-343
4.7.1 BACnet Services ......................................................................................... 4-343
4.7.2 BACnet Protocol Structure .......................................................................... 4-344
4.7.3 BACnet Specifications ................................................................................ 4-345
4.7.4 BACnet Object Properties ........................................................................... 4-346
4.8 MetaSys N2 Communication Protocol ...............................................................
4-349
4.8.1 Introduction and Setting .............................................................................. 4-349
4.8.2 MetaSys N2 Specification ........................................................................... 4-349
4.8.3 Definition of MetaSys N2 Communication Protocol .................................... 4-350
4.8.4 MetaSys N2 Communication Protocol in F510 Model ................................. 4-351
Chapter 5 Check Motor Rotation and Direction ........................................................... 5-1
Chapter 6 Speed Reference Command Configuration ................................................ 6-1
6.1 Reference from Keypad .......................................................................................... 6-1
6.2 Reference from External Analog Signal (0-10V / 4-20mA) .................................... 6-2
6.3 Reference from Serial Communication RS485 (00-05=3) ....................................... 6-4
6.4 Reference from two Analog Inputs ......................................................................... 6-6
6.5 Change Frequency Unit from Hz to rpm ................................................................. 6-6
Chapter 7 Operation Method Configuration (Run / Stop) ........................................... 7-1
7.1 Run/Stop from the Keypad (00-02=0) – Default Setting ......................................... 7-1
7.2 Run/Stop from External Switch / Contact or Pushbutton (00-02=1) ........................ 7-2
7.3 Run/Stop from Serial Communication RS485 (00-02=3) ......................................... 7-3
Chapter 8 Motor and Application Specific Settings ..................................................... 8-1
8.1 Set Motor Nameplate Data (02-01, 02-05) ............................................................... 8-1
8.2 Acceleration and Deceleration Time (00-14, 00-15) ............................................... 8-2
8.3 Torque Compensation Gain (01-10) ........................................................................ 8-3