4-317
Symbol Description
Forward /Reversal control can be set by ( I1~f8 )
OFF: Forward(FWD)
ON: Reversal(REV)
Speed terminal control can be set by ( I1~f8 )
OFF: Operation based on set frequency
ON: Operation based on frequency of speed
Set frequency (can be constant or V3, V4, V5, V8 )
Speed frequency (can be constant or V3, V4, V5, V8)
Acceleration time (ACC Time)
Deceleration time (DEC Time)
Operation command output (F1 to F8, there are a total of 8 operation control functions)
Example:
5: Summation and subtraction functions
RESULT (calculation result) = V1+ V2- V3
To Next Page
Loading...
