7.3.6 User Phone Numbers
User phone numbers are entered in this step so that the alarm system can notify the end user. The
system can notify 6 phone numbers in total.
• LED Keypad;
1. User Phone Number: [06] [01] → [XXXXXXXXXXX] → [√ OK]
2. User Phone Number: [06] [02] → [XXXXXXXXXXX] → [√ OK]
3. User Phone Number: [06] [03] → [XXXXXXXXXXX] → [√ OK]
4. User Phone Number: [06] [04] → [XXXXXXXXXXX] → [√ OK]
5. User Phone Number: [06] [05] → [XXXXXXXXXXX] → [√ OK]
6. User Phone Number: [06] [06] → [XXXXXXXXXXX] → [√ OK]
• LCD Keypad;
[Basic Settings √ OK] → [User Phones √ OK] → [1- User No XXXXXXXXXXX] → [√ OK]
[Basic Settings √ OK] → [User Phones √ OK] → [2- User No XXXXXXXXXXX] → [√ OK]
[Basic Settings √ OK] → [User Phones √ OK] → [3- User No XXXXXXXXXXX] → [√ OK]
[Basic Settings √ OK] → [User Phones √ OK] → [4- User No XXXXXXXXXXX] → [√ OK]
[Basic Settings √ OK] → [User Phones √ OK] → [5- User No XXXXXXXXXXX] → [√ OK]
[Basic Settings √ OK] → [User Phones √ OK] → [6- User No XXXXXXXXXXX] → [√ OK]
eg. To set 1
st
user phone as 05321234567; [06] [01] [05321234567] [√ OK]
PS1: If the phone line provided from phone switchboard with specific number, you should enter
that number before entering the phone number and press long [0].
eg. [06] [01] [9] [0 uzun bas] [05321234567] [√ Tamam]
PS2: To erase any CMS phone number, get to related address and press-hold [B] Key.
eg. [06] [01] [B Long] [√ OK]
7.3.7 User Codes
By default no user code is defined in the control panel. In order to create a user code, you must
login with “Master Code” in “Master Menu”.
To Enter Master Menu;
• [Fx] → [4]
• Enter your Master Code (Factory Default: “1234”)
To create User Codes;
• LED Keypad;
1. User Code: [07] [01] → [XXXX] → [√ OK]
2. User Code: [07] [02] → [XXXX] → [√ OK]
3. User Code: [07] [03] → [XXXX] → [√ OK]
4. User Code: [07] [04] → [XXXX] → [√ OK]
5. User Code: [07] [05] → [XXXX] → [√ OK]
6. User Code: [07] [06] → [XXXX] → [√ OK]
7. User Code: [07] [07] → [XXXX] → [√ OK]
8. User Code: [07] [08] → [XXXX] → [√ OK]
9. User Code: [07] [09] → [XXXX] → [√ OK]
10. User Code: [07] [10] → [XXXX] → [√ OK]
11. Threat (Duress) Code: [07] [11] → [XXXX] → [√ OK]
To Next Page
Loading...
