• LCD Keypad;
[User Settings √ OK]→[Limitations √ OK]→[1- Limitations 1-2-3-4-5]→[√ OK]
[User Settings √ OK]→[Limitations √ OK]→[2- Limitations 1-2-3-4-5]→[√ OK]
[User Settings √ OK]→[Limitations √ OK]→[3- Limitations 1-2-3-4-5]→[√ OK]
[User Settings √ OK]→[Limitations √ OK]→[4- Limitations 1-2-3-4-5]→[√ OK]
[User Settings √ OK]→[Limitations √ OK]→[5- Limitations 1-2-3-4-5]→[√ OK]
[User Settings √ OK]→[Limitations √ OK]→[6- Limitations 1-2-3-4-5]→[√ OK]
[User Settings √ OK]→[Limitations √ OK]→[7- Limitations 1-2-3-4-5]→[√ OK]
[User Settings √ OK]→[Limitations √ OK]→[8- Limitations 1-2-3-4-5]→[√ OK]
[User Settings √ OK]→[Limitations √ OK]→[9- Limitations 1-2-3-4-5]→[√ OK]
[User Settings √ OK]→[Limitations √ OK]→[10- Limitations 1-2-3-4-5]→[√ OK]
PS: Options 3 and 4 are available only for the guest user (User 10).
7.8 COMMUNICATOR SETTINGS
This is the section where the general settings of the device related to call, SMS and Central
Monitoring Center are made.
7.8.1 General Options
General Settings
This is the section where CMS dialing, user dialing and telephone calls are made in general settings.
• LED Keypad;
[50] [01] → [1-2-3-4-5-6-7-8] → [√ OK]
• LCD Keypad;
[Communicator √ OK]→[General Options √ OK]→[General Settings 1-2-3-4-5-6-7-8]→[√ OK]
Dial Attempts
The number of times the call will be tried is determined. A value can be selected between 1 and 15.
• LED Keypad;
[50] [02] → [XX] → [√ OK]
• LCD Keypad;
[Communicator √ OK]→[General Settings √ OK]→[Dial Attempts XX]→[√ OK]
Test Interval
This is where you set how often the test signal is sent to the CMS.
Important: It is recommended to set this time to 24 Hours to avoid high invoice amounts when
using a PSTN telephone line.
To Next Page
Loading...
