Teknim PARS Series - Timer Settings

TEKNİM PARS SERIES INTRUDER ALARM SYSTEM INSTALLATION AND PROGRAMMING MANUAL
32 / 81
7.4.5 Timer Settings
In this section, you can program the PGM outputs are activated on the specified dates and times.
Timer 1 Settings
This setting determines whether the PGM is to be controlled with timer and whether the PGM output
is active or inactive at the specified time.
Option
1.
2.
Feature
PGM Use
PGM Active / Inactive
LED ON
Yes
Active
LED OFF
NO
Inactive
• LED Keypad; [14] [01] → [1-2] → [√ OK]
• LCD Keypad; [Panel Settings √ OK]→[Timer Settings √ OK]→[Timer 1 Settings 1-2] → [√ OK]
Timer 1 Days
This setting determines the days that PGM will be activated.
• LED Keypad; [14] [02] → [1234567] → [√ OK]
• LCD Keypad; [Panel Settings √ OK]→[Timer Settings √ OK] → [Timer 1 Days 1234567] → [√ OK]
PS: Days of the week are; 1: Sunday 2: Monday 3: Tuesday 4: Wednesday 5: Thursday 6: Friday
7: Saturday.
Timer 1 Time
This setting determines the time that PGM will be activated.
• LED Keypad; [14] [03] → [HH:MM] → [√ OK]
• LCD Keypad; [Panel Settings √ OK] → [Timer Settings √ OK] → [Timer 1 Time HH:MM] → [√ OK]
Timer 2 Settings
This setting determines whether the PGM is to be controlled with second timer and whether the
PGM output is active or inactive at the specified time.
Option
1.
2.
Feature
PGM Use
PGM Active / Inactive
LED ON
Yes
Active
LED OFF
NO
Inactive
• LED Keypad; [14] [04] → [1-2] → [√ OK]
• LCD Keypad; [Panel Settings √ OK]→[Timer Settings √ OK]→[Timer 2 Settings 1-2] → [√ OK]
Timer 2 Days
This setting determines the days that PGM will be activated.
• LED Keypad; [14] [05] → [1234567] → [√ OK]
• LCD Keypad; [Panel Settings √ OK]→[Timer Settings √ OK] → [Timer 2 Days 1234567] → [√ OK]