Teknim PARS Series - User Settings; Start Time

TEKNİM PARS SERIES INTRUDER ALARM SYSTEM INSTALLATION AND PROGRAMMING MANUAL
42 / 81
Language (Only LCD Keypad)
You can change the language on LCD Keypad. Supported languages are English and Turkish.
• LCD Keypad;
[Keypad Settings √ OK]→[ Keypad Customize √ OK]→[13- Language]→[√ OK]
Logo Line 1 (Only LCD Keypad)
The information that will appear on the LCD Keypad screen when idle can be entered in this field.
LCD display can be set in two lines. Keypad numeric keys (Figure: 19) and arrow keys can be used to
enter letters.
• LCD Keypad;
[Keypad Settings √ OK]→[Keypad Customize √ OK]→[15- Logo Line 1]→[√ OK]
Logo Line 2 (Only LCD Keypad)
The information that will appear on the LCD Keypad screen when idle can be entered in this field.
LCD display can be set in two lines. Keypad numeric keys (Figure: 19) and arrow keys can be used to
enter letters.
• LCD Keypad;
• [Keypad Settings √ OK]→[Keypad Customize √ OK]→[16- Logo Line 2]→[√ OK]
7.7 USER SETTINGS
This is the section where the user codes are create or changed. These settings are only accessible in
the “Master Menu” and can only be entered with the Master User Code.
7.7.1 Start Time
You can set which user codes will be start active in a specific time. You can enter Hour (HH) and
minute (MM).
• LED Keypad;
1. User - [40] [01] → [HH:MM] → [√ OK]
2. User - [40] [02] → [HH:MM] → [√ OK]
3. User - [40] [03] → [HH:MM] → [√ OK]
4. User - [40] [04] → [HH:MM] → [√ OK]
5. User - [40] [05] → [HH:MM] → [√ OK]
6. User - [40] [06] → [HH:MM] → [√ OK]
7. User - [40] [07] → [HH:MM] → [√ OK]
8. User - [40] [08] → [HH:MM] → [√ OK]
9. User - [40] [09] → [HH:MM] → [√ OK]
10. User - [40] [10] → [HH:MM] → [√ OK]
• LCD Keypad;
[User Settings √ OK]→[Start Time √ OK]→[1- Start Time HH:MM]→[√ OK]
[User Settings √ OK]→[Start Time √ OK]→[2- Start Time HH:MM]→[√ OK]
[User Settings √ OK]→[Start Time √ OK]→[3- Start Time HH:MM]→[√ OK]
[User Settings √ OK]→[Start Time √ OK]→[4- Start Time HH:MM]→[√ OK]
[User Settings √ OK]→[Start Time √ OK]→[5- Start Time HH:MM]→[√ OK]
[User Settings √ OK]→[Start Time √ OK]→[6- Start Time HH:MM]→[√ OK]
[User Settings √ OK]→[Start Time √ OK]→[7- Start Time HH:MM]→[√ OK]
[User Settings √ OK]→[Start Time √ OK]→[8- Start Time HH:MM]→[√ OK]
[User Settings √ OK]→[Start Time √ OK]→[9- Start Time HH:MM]→[√ OK]
[User Settings √ OK]→[Start Time √ OK]→[10- Start Time HH:MM]→[√ OK]