To turn on the chime feature when the zone is de-active;
• LED Keypad;
Zon 1-8 - [32] [05] → [1-2-3-4-5-6-7-8] → [√ OK]
Zon 9-16 - [32] [06] → [1-2-3-4-5-6-7-8] → [√ OK]
Zon 17-24 - [32] [07] → [1-2-3-4-5-6-7-8] → [√ OK]
Zon 25-32 - [32] [08] → [1-2-3-4-5-6-7-8] → [√ OK]
• LCD Keypad;
[Keypad Settings √ OK]→[Keypad Customize √ OK]→[1- Chime OFF 1-8 Zones 1-2-3-4-5-6-7-8]→[√ OK]
[Keypad Settings √ OK]→[Keypad Customize √ OK]→[1- Chime OFF 9-16 Zones 1-2-3-4-5-6-7-8]→[√ OK]
[Keypad Settings √ OK]→[Keypad Customize √ OK]→[1- Chime OFF 17-24 Zones 1-2-3-4-5-6-7-8]→[√ OK]
[Keypad Settings √ OK]→[Keypad Customize √ OK]→[1- Chime OFF 25-32 Zones 1-2-3-4-5-6-7-8]→[√ OK]
Zone Light
Defines keypad lights when zones are activated.
• LED Keypad;
Zon 1-8 - [32] [09] → [1-2-3-4-5-6-7-8] → [√ OK]
Zon 9-16 - [32] [10] → [1-2-3-4-5-6-7-8] → [√ OK]
• LCD Keypad;
[Keypad Settings √ OK]→[Keypad Customize √ OK]→[09- Lights 1-8 Zones]→[√ OK]
[Keypad Settings √ OK]→[Keypad Customize √ OK]→[10- Lights 9-16 Zones]→[√ OK]
Emergency Keys
There are shortcut keys on the keypad that can be manually created
for Panic, Fire and Medical alarms (Figure 20). Press and hold these
keys to activate. In this section, you can select whether the
emergency shortcut keys on the keypad are active or not. Also you
can choose if Keypad installation tamper switch will be active or not.
• LED Keypad;
[32] [11] → [1-2-3-4] → [√ OK]
• LCD Keypad;
[Keypad Settings √ OK]→[Keypad Customize √ OK]→[11- EMG Buttons 1-2-3-4]→[√ OK]
Sound Option
You can set the following sound options on Keypad.
To Next Page
