Need help?Do you have a question about the Teknim VAP416 and is the answer not in the manual?
General| Brand | Teknim |
|---|---|
| Model | VAP416 |
| Category | Security System |
| Language | English |
Covers drilling holes, mounting the case, opening the cover, and connecting detectors, siren, and telephone lines.
Details the connections for siren to the 12V, SRN, and GND terminals on the panel.
Explains how to connect detectors to the Z1-Z16 inputs, including NC/NO and EOL resistor configurations.
Illustrates sample wiring diagrams for detectors, including end-of-line resistor configurations with and without tamper.
Describes how to connect keypads to the panel using 12V DT, CK, GND, with warnings about connection and cable length.
Details the procedure for connecting the phone line to the panel, including warnings about ADSL lines.
Explains the use of the three PGM outputs for various applications and potential expansion.
Covers the connection of AC power and batteries, including information on fuses and energy saving mode.
Details the usage of the VPC104 7-segment LED display keypad, including operation, error codes, and features.
Explains the operation of VPC108/VPC016/VPC116/VPC132 LED keypads, including LEDs, buttons, and customization.
Covers the usage of the VPC301 LCD display keypad, including navigation, customization, and features.
Details how the panel operates in SPT mode, including adjustments and feature behavior.
Guides through basic programming tasks like setting time, date, CMS and user phone numbers.
Details how to access and exit the Installer and Master programming modes.
Explains the procedure for changing existing user, master, and installer codes.
Covers essential panel settings like time, date, entry/exit delays, CMS details, and user codes.
Configures core panel functionalities such as bypass, reset types, AC fail delay, and siren settings.
Defines zone wiring, types, partitions, and trigger delays for optimal sensor configuration.
Manages keypad permissions, partition assignments, and other keypad-specific configurations.
Sets user access permissions based on time, day, partition, and keypad limitations.
Configures dialer settings, CMS communication, and reporting intervals for alarm notifications.
Manages event routing to user phones or CMS, and configures event codes and sending masks.
Details the setup and configuration for optional modules like RF remote control and zone expansion.
Provides a comprehensive list of programming addresses for various panel functions and settings.
Guides on resetting user, master, and engineer codes back to their default factory values.
Explains the procedure to reset all panel program settings to their original factory defaults.
To Next Page
