Teknim VAP416 - Emergency Buttons; Sound Settings; Trouble Warning Sounds; Reporting

VAP416 Installation & Operation Manual
TD-1/07-004
24 / 81
Operation
VPC108
VPC016,116
VPC132
Zone illumination while a zone is
opened
99 03
99 05(1-8 zone)
99 06(9-16 zone)
99 09(1-8 zone)
99 10(9-16 zone)
99 11(17-24 zone)
99 12(25-32 zone)
4.2.6.3. Emergency Buttons
1st, 2nd and 3rd buttons can be used for panic, fire and duress alarm. Related alarm
will be activated by pressing and holding these buttons. These buttons can be
disabled especially in open public areas in order to prevent wrong usage.
Button
Option
VPC108
VPC016,116
VPC132
Panic (1)
1
st
option
99 04
99 07
99 13
Fire (2)
2
nd
option
Duress (3)
3
rd
option
Tamper (4)
4
th
option
4.2.6.4. Sound Settings
Warning sounds of the keypad can be disabled as follows;
Sounds
Option
VPC108
VPC016,116
VPC132
Exit delay sound
1
st
option
99 05
99 08
99 14
Armed sound
2
nd
option
Alarm sound
3
rd
option
Error sound
4
th
option
Key sound
5
th
option
Confirmation sound
6
th
option
4.2.6.5. Trouble Warning Sounds
Warning sound of the keypad can be set according to trouble type as follows;
Trouble Sound
Option
VPC108
VPC016,116
VPC132
Power Failure
1
st
option
99 06
99 09
99 15
Battery Failure
2
nd
option
Date and/or time is not set
3
rd
option
Telephone line failure
4
th
option
Zone trouble
5
th
option
Battery trouble
6
th
option
4.2.7 Reporting
Any information about panel's various status can be monitored by pressing following
buttons;