8.1.4. Central Monitoring Station Account Numbers
If Panel will be connected to Central Station, Account number which given by CMS is
entered here in the following address. 2 different CMS account can be defined.
1
st
Account ID
Address 04 01.< IP >
Display for settings:
LED 04 01 (wait)
LCD BASIC SETTINGS→CMS ACCNT #’ S→01-CMS ACCNT NO (wait)
Change for settings:
LED
04 01 <Account ID>
"√" LCD BASIC SETTINGS→CMS ACCNT #’ S→01-CMS ACCNT NO
Shown/Entered value: <Account ID>, 4 Digit Number
Factory default: 0000
Example: To set 1
st
Account ID. to 2134. 04 01 2 1 3 4 √
2
nd
Account ID
Address 04 02.< IP >
Display for settings:
LED 04 02 (wait)
LCD BASIC SETTINGS→CMS ACCNT #’ S→02-CMS ACCNT NO (wait)
Change for settings:
LED
04 02 <Account ID>
"√" LCD BASIC SETTINGS→CMS ACCNT #’ S→02-CMS ACCNT NO
Shown/Entered value: <Account ID>, 4 digit number
Factory default: 0000
Example: To set 2
nd
Account ID 2135. 04 02 2 1 3 5 √
8.1.5. Central Monitoring Station Phone Numbers
If Panel will be connected to Central Station, CMS Phone Numbers is entered here. If
you use 2 phone numbers of the same CMS, first number (main number) is entered
to address of 05 01, second number (auxiliary number) is entered to 05 03 and
Account number is entered to address of 04 01.If panel can not reach to first
number(main number),then dials second number(auxiliary number).If 2.CMS will be
used, CMS phone numbers are entered to 05 02 and 05 04 addresses.2. CMS
Account No is entered to address of 04 02.To delete phone number, press "0" long at
related address. CMS addresses (50 11-15) which message will be sent is also
related with this subject. Communicator will be activated automatically when CMS
phone numbers are entered to Panel
1
st
Central Monitoring Station (Main) Phone Number
Address 05 01.< IP >
Display for settings:
LED 05 01 (wait)
LCD BASIC SETTINGS→CMS PHONES→01-CMS PHONE NR (wait)
Change for settings:
LCD BASIC SETTINGS→CMS PHONES→01-CMS PHONE NR
To Next Page
Loading...
