Teknim VAP416 - 2. Features

VAP416 Installation & Operation Manual
TD-1/07-004
8 / 81
2. FEATURES
Inputs
 Programmable 16+16 zone,
 NC, NO, 1-EOL Resistor, 2-EOL Resistor , None-end of line resistor zones,
Double zone.
 Different zone types(Door, Window, Tamper, Fire etc.)
 Additional features assigned zones(Follower zone, end zone, silent zone etc.)
 Enter/Exit delays for each partition
 Zones can be programmed for arming by key
 Sabotage switch on Panel and Keypad
Siren
 Outdoor or Indoor sirens can be connected
 Adjustable cutoff time
Keypad
 Can be used with 4 Keypads(max)
 Addressable Keypads
 LED or LCD Keypads can be used together
 Programmable backlight
 Displays event logs
 Displays Ready, Armed, Trouble, Fire status
 Shortcut buttons like Test, Report, and Memory
 Only displays zones assigned to Keypads
 Chime option
Outputs
 Programmable outputs (NC, NO)
 Siren Output; SRN (NC, NO, cutoff time)
General Features
 Master, Installer, Guest, Duress, PC Remote control and 29 user codes
 Real time clock
 256 event logs
 8 user phone numbers
 Communicator supports 2 Central Monitoring Stations (Contact ID, SIA)
 Each Central Monitoring Station has 2 phone numbers
 Manual and Automatic Bypass
 Smart Partition Technology
 PC connection and software
 4 Timers
Types of Arming/Disarming Panel
 Arm with single button
 Arm/Disarm specific partitions
 Automatic Arm/Disarm panel in the specific time,
 Arm by inactivity
 Arm/Disarm by key
 Arm/Disarm with remote controller(Remote control module must be connected to
Panel)
 Arm/Disarm by telephone and PC
Alarm Types
 Siren Alarm: Siren alarms, panel dials user and Central Monitoring Station.
 Silent Alarm: Siren doesn't alarm, panel dials user and Central Monitoring Station.