Shown/Entered value: <Value>, 1,2,3,4 multi selection from above list
Factory default: Nothing selected
Example: To select all partitions for automatic arm do
12 01 1 (turn on) 2 (turn on) 3 (turn on) 4 (turn on) √
Automatic Arm Days
Selected partitions are armed on time of selected days;
1=Monday, 2=Tuesday, 3=Wednesday, 4=Thursday, 5=Friday, 6=Saturday,
7=Sunday
Address 12 02. < IP >
Display for settings:
LED 12 02 (wait)
LCD PANEL SETTINGS→AUTO ARM/DISARM→AUTO ARM (wait)
DAYS:
Change for settings:
LED 12 02 <Value> "√"
LCD PANEL SETTINGS→AUTO ARM/DISARM→AUTO ARM
DAYS: <Value> "√"
Shown/Entered value: <Value>, 1..7 multi selection from the table.
Factory default: All selected
Example: To select days except Saturday and Sunday do
12 02 1 (turn on) 2 (turn on) 3 (turn on) 4 (turn on) 5 (turn on) √
Automatic Arm Time
Selected Partitions are armed in specific time on selected days.
Address 12 03. < IP >
Display for settings:
LED 12 03 (wait)
LCD PANEL SETTINGS→AUTO ARM/DISARM→AUTO ARM (wait)
HOUR:
Change for settings:
LED 12 03 <HH MM> "√"
LCD PANEL SETTINGS→AUTO ARM/DISARM→AUTO ARM
HOUR: <HH MM> "√"
Shown/Entered value: HH=hour, MM=minute, number
Factory default: 00:00
Example: To set arm time to 18:30 do
12 03 1 8 3 0 √
8.2.3.2 Automatic Disarm Partitions
Automatic Disarm Partition Selection
Selected partitions in this address are automatically armed. To disable automatic arm
feature, unselect partitions. Meanings of options are in the following;
ABCD: 1.option=A, 2.option=B, 3.option=C, 4. option=D
SPT: 1.option=Interior, 2.option=Window, 3.option=Door, 4.option=Exterior
If it is used with SPT, only 1=Interior is recommended setting. Page 30 for
the details.
Address 12 04. < IP >
Display for settings:
LED 12 04 (wait)
LCD PANEL SETTINGS→AUTO ARM/DISARM→AUTO DISARM (wait)
PARTITIONS:
To Next Page
Loading...
