Teknim VAP416 - User Telephone Numbers

VAP416 Installation & Operation Manual
TD-1/07-004
40 / 81
Shown/Entered value: <Phone>, Maximum 15 digit phone number (including dialing
tone if the number will be dialed from extension number)
Factory default: Empty
Example: To set CMS1 phone number to 02161234567. 05 01 0 2 1 6 1 2 3 4 5 6 7 √
 1
st
Central Monitoring Station (Auxiliary) Phone Number
Address 05 03.< IP >
Display for settings:
LED 05 03 (wait)
LCD BASIC SETTINGS→CMS PHONES→03-CMS PHONE NR (wait)
Change for settings:
LED 05 03 <Phone No> "√"
LCD BASIC SETTINGS→CMS PHONES→03-CMS PHONE NR
<Phone> "√"
Shown/Entered value: <Phone>, Maximum 15 digit phone number (including dialing
tone if the number will be dialed from extension number)
Factory default: Empty
Example: To set CMS 1 Aux Phone Number to 1234567. 05 03 1 2 3 4 5 6 7 √
8.1.6. User Telephone Numbers
Besides Center Monitor Stationing telephone numbers, there is also a memory for 8
personal telephone numbers. Incase of alarms or required conditions, these
telephone numbers shall be called. If the first called body does not give the
confirmation code (by entering the password or pushing the button) or does not
answer the phone, the device stops calling that number after defined trying quantity
of call and it goes on calling the other chosen number of that event from the
telephone address (50 16...50 20). It shall stop calling the personal telephone
number after the first confirmation code, if the option of "stop calling after first
confirmation" is chosen. (If the telephone numbers are separated according to the
zones, the confirmation of each zones are evaluated separately. To delete the
telephone number on that address, it is necessary to push "0" continuously. The
control panel activates calling the user telephones automatically, when the personal
telephone number is entered.
 1
st
Person Phone Number
Address 06 01.< IP >
Display for settings:
LED 06 01 (wait)
LCD BASIC SETTINGS→PRIVATE PHONES→01-USER PHONE NR (wait)
Change for settings:
LED 06 01 <Phone No> "√"
LCD BASIC SETTINGS→PRIVATE PHONES→01-USER PHONE NR
<Phone> "√"
Shown/Entered value: <Phone>, Telefon no boşluk dahil en fazla 15 haneli
Factory default: Empty
Example 1: 1.To set the personal telephone no 02161234567.
06 01 0 2 1 6 1 2 3 4 5 6 7 √
Example 2: 2.To set the personal telephone no 02161234567 by getting line by 9
form the telephone.
06 02 9 (0 long) 0 2 1 6 1 2 3 4 5 6 7 √
 2…8 Phone Numbers
Address 06 02...06 08.< IP >