Change for settings:
LED 12 04 <Value> "√"
LCD PANEL SETTINGS→AUTO ARM/DISARM→AUTO DISARM
PARTITIONS: <Value> "√"
Shown/Entered value: <Value>, 1,2,3,4 multi selection from above list
Factory default: Nothing selected
Example: Setting all disarming partitions
12 04 1 (turn on) 2 (turn on) 3 (turn on) 4 (turn on) √
Automatic Disarm Days
Selected partitions are armed on time of selected days;
1=Monday, 2=Tuesday, 3=Wednesday, 4=Thursday, 5=Friday, 6=Saturday,
7=Sunday
Address 12 05. < IP >
Display for settings:
LED 12 05 (wait)
LCD PANEL SETTINGS→AUTO ARM/DISARM→AUTO DISARM (wait)
DAYS:
Change for settings:
LED 12 05 <Value> "√"
LCD PANEL SETTINGS→AUTO ARM/DISARM→AUTO DISARM
DAYS: <Value> "√"
Shown/Entered value: <Value>, 1..7 multi selection from the table.
Factory default: All selected
Example: To select days except Saturday and Sunday do
12 05 1 (turn on) 2 (turn on) 3 (turn on) 4 (turn on) 5 (turn on) √
Automatic Disarm Time
Selected Partitions are armed in specific time on selected days.
Address 12 06. < IP >
Display for settings:
LED 12 06 (wait)
LCD PANEL SETTINGS→AUTO ARM/DISARM→AUTO DISARM (wait)
HOUR:
Change for settings:
LED 12 06 <HH MM> "√"
LCD PANEL SETTINGS→AUTO ARM/DISARM→AUTO DISARM
HOUR: <HH MM> "√"
Shown/Entered value: HH=hour, MM=minute, number
Factory default: 00:00
Example: To set disarm time to 8:30
12 06 0 8 3 0 √
8.2.3.3 Automatic Arm Partitions on No Activity
Automatic Arm Partitions on No Activity
Selected partitions is armed automatically if no activation is occurs within assigned
time. No partition should be selected to close this feature
ABCD: 1.option=A, 2.option=B, 3.option=C, 4. option=D
SPT: 1.option=Interior, 2.option=Window, 3.option=Door, 4.option=Exterior
If it is used with SPT, only 1=Interior is recommended setting. Page 30 for
the details.
Address 12 07. < IP >
To Next Page
Loading...
