If unit is exposed to water or rain,
If unit is dropped or cover is damaged,
If you realize that device doesn't work properly,
If unit doesn’t operate properly in operating conditions,
SPARE PART:
If parts of device are changed to repair, ensure that technician uses original parts
against electrical shock, fire, etc.
INTRODUCTION FOR THIS GUIDE
* Teknim Elektronik reserves the right to change information on the manuals at any time without notice.
There are the rules for installing VAP416 which the customers need, in this guide.
These rules are explained as below:
<23 0x>: Indicates an address (starts with 23 0). 'x' is a one digit number.
<23 xx>: Indicates an address (starting with 23). 'xx' is a two digit number.
<06 01...06 03>: Indicates a consecutive address group. <06 01>, <06 02>, <06
03> etc.
<10 02 2.Option>: Indicates option(2) of an address(10 02).
<code>#: Indicates that key must be firstly pressed, secondly user or master
code must be entered and finally # key must be pressed on the telephone
keypad.
<Enter 13 01 "8">: Indicates that an address (13 01) must be entered (8).
<10 02 2.Option " Turn on">: Indicates that the necessary option(2) must be
selected by "Turn on" operation (or must not be selected by "Turn off" operation)
in an address(10 02).
<10 01 1 and 4.Option "Turn off">: Indicates that the necessary options(1, 4) must
be selected by "Turn on" operation (or must not be selected by "Turn off"
operation) in an address(10 01).
<21 01...21 08 1..4.Option "Turn on">: Indicates that the necessary options(1, 2,
3, 4) must be selected by "Turn on" operation (or must not be selected by "Turn
off" operation) in a consecutive address group (from 21 01 up to 21 08).
Press (long) to "8-Test" key: Indicates that the related key(8) must be pressed on
the keypad and must be kept pressing until the long "beep" sound come and must
be released after this sound.
To Next Page
Loading...
