Teknim VAP416 - 1. Introduction

VAP416 Installation & Operation Manual
TD-1/07-004
7 / 81
1. INTRODUCTION
VAP416 is 16+16 zone alarm panel that meets desires. It has simple usage also lets
technician to configure user needs simply.
Simple Mounting
 Panel is mounted wall by three holes.
 Panel case has cable holes to pass cables through Panel PCB.
 Functions of terminals are written on PCB. Connect cables to proper place.
 Connect telephone lines.
 Connect Battery and AC Power.
Simple Maintenance
 Device monitors troubles instantly.
 Test feature provides simple maintenance.
 All events are kept in memory.
 Battery doesn’t need maintenance.
Simple Programming
 Programming addresses is grouped by feature.
 Installer can configure panel, only by setting user passwords, dialer numbers and
activating dialer.
 All settings can be configured or can be downloaded to computer, by using PC
software and connection cable.
 All adjustments can be transferred from panel to computer or from computer to
panel.
Simple Usage
 Simply arm/disarm panel by entering code.
 Smart Partition Technology provides quick arming.
 Arm/Disarm by Remote Controller.
 Arm/Disarm by Telephone.
 Arm/Disarm by PC.
 Arm/Disarm by Key.
 Automatic Arm/Disarm feature by timers.
 Arm by inactivity.
Simple Automation
 PGM outputs can be activated by timers.
 PGM outputs can be activated by assigned zones or partitions.
 PGM outputs can be used as ARM (PGM is activated when selected partitions are
armed) or SRN output.
 PGM outputs can be activated on fire or can be used to reset fire detectors.
 PGM outputs can be controlled by Telephone.
 PGM outputs can be controlled by PC.
 PGM outputs can be controlled by Keypad.
Simple Management
 Time limit can be assigned to users.
 Users can arm specific partitions.
 User keypads can be selected.