Teknim VAP416 - Guest Partitions; Keypads; User Keypads; Guest Keypads

VAP416 Installation & Operation Manual
TD-1/07-004
63 / 81
LED 43 01 <Value> "√"
LCD USER SETTINGS→PARTITIONS→01-AUTHORISED
PARTITION:<Value>
Shown/Entered value: <Value>, 1...4 multi selection from above list
Factory default: All selected
Example: To select A partition for User 1.
43 01 1 (turn on) 2 (turn off) 3 (turn off) 4 (turn off) √
User 2...29 Partitions
Address 43 02...43 29. < MP >
Factory default: All selected
8.5.4.2 Guest Partitions
Address 43 30. < MP >
Display for settings:
LED 43 30 (wait)
LCD USER SETTINGS→PARTITIONS→30-AUTHORISED (wait)
PARTITIONS:
Change for settings:
LED 43 30 <Value> "√"
LCD USER SETTINGS→PARTITIONS→30-AUTHORISED
PARTITIONS:<Value>
Shown/Entered value: <Value>, 1...4 multi selection from above list
Factory default: All selected
8.5.5. Keypads
User or Guest code is activated for adjusted keypad.
1.option=Keypad 1, 2.option=Keypad 2,
3.option=Keypad 3, 4.option=Keypad 4
8.5.5.1 User Keypads
User 1 Keypads
Address 44 01. < MP >
Display for settings:
LED 44 01 (wait)
LCD USER SETTINGS→KEYPADLERİ→01-AUTHORISED (wait)
KEYPADS:
Change for settings:
LED 44 01 <Value> "√"
LCD USER SETTINGS→KEYPADLERİ→01-AUTHORISED
KEYPADS:<Value>
Shown/Entered value: <Value>, 1...4 multi selection from above list
Factory default: All selected
Example: To assign 1.keypad and 2.keypad to User 1 do.
44 01 1 (turn on) 2 (turn on) 3 (turn off) 4 (turn off) √
User 2...29 Keypads
Address 44 02...44 29. < MP >
Factory default: All selected
8.5.5.2 Guest Keypads
Address 44 30. < MP >