Teknim VAP416 - Chime Settings; Illumination of Button According to Zone; Emergency Buttons; Sound Settings

VAP416 Installation & Operation Manual
TD-1/07-004
28 / 81
4.3.6.1. Chime Settings
In order to hear warning sound during any zone(s) is opened or closed you have to
make below settings in the related address:
Operation
VPC301
Chime sound while a zone is
opened
Keypad Setting/Customize/Chime 01 A
Keypad Setting/Customize/Chime 01 B
Keypad Setting/Customize/Chime 01 C
Keypad Setting/Customize/Chime 01 D
Chime sound while a zone is
closed
Keypad Setting/Customize/Chime 10 A
Keypad Setting/Customize/Chime 10 B
Keypad Setting/Customize/Chime 10 C
Keypad Setting/Customize/Chime 10 D
4.3.6.2. Illumination of Button According to Zone
When any zone is opened buttons can be automatically illuminated. This feature
helps users to find keypad in the dark.
Option
VPC301
Zone illumination while a zone is
opened
Keypad Setting/Customize/Light Zone 1-8
Keypad Setting/Customize/Light Zone 9-16
Keypad Setting/Customize/Light Zone 17-24
Keypad Setting/Customize/Light Zone 25-32
4.3.6.3. Emergency Buttons
1st, 2nd and 3rd buttons can be used for panic, fire and duress alarm. Related alarm
will be activated by pressing and holding these buttons. These buttons can be
disabled especially in open public areas in order to prevent wrong usage.
Button
Option
VPC301
Panic (1)
1
st
option
Keypad setting/Customize/Buttons
Fire (2)
2
nd
option
Duress (3)
3
rd
option
Tamper (4)
4
th
option
4.3.6.4. Sound Settings
Warning sounds of the keypad can be disabled as follows.
Sounds
Option
VPC301
Exit delay sound
1
st
option
Keypad Setting/Customize/Sound
Armed sound
2
nd
option
Alarm sound
3
rd
option
Error sound
4
th
option
Key sound
5
th
option
Confirmation sound
6
th
option