Teknim VAP416 - Trouble Codes

VAP416 Installation & Operation Manual
TD-1/07-004
20 / 81
t23
Zone 8 open-circuit
t24
Zone 8 short-circuit
C
There is no communication between keypad and panel
4.1.7 Trouble Codes
Code
Type of Trouble
Description
h1
Invalid address
Invalid address has been entered
h2
Invalid data
Entered data is invalid
h3
No permission
Your permissions are limited
h4
Panel can not be armed
There is an opened zone
h5
Panel is already armed
The partitions you try to arm are already armed
h6
Invalid Code
Invalid code has been entered
h7
Out of limit
Entered value is out of limit. For example; if you
enter a value over than 23 for the time
h8
Type of data is wrong
Length of data that you have entered is wrong.
For example; if you enter 2 digits instead of 4
digits
h9
Feature is closed
Feature you have tried to use is closed
h10
Invalid function
The function you are trying to use is invalid
h11
Invalid parameter
The parameter you are trying to use is invalid.
Example: If you try to test 3.Central Station,
keypad displays this trouble
h12
Out of time limit
If user is trying to use keypad out of his/her time
limit, keypad displays this trouble
h13
Not allowed in this
keypad
User is not allowed in this keypad
h14
Invalid setting
The setting you have made is invalid
h15
Unknown trouble
Trouble is not known