Teknim VAP416 - Guest Start Time; Finish Time; User Finish Time; Guest Finish Time

VAP416 Installation & Operation Manual
TD-1/07-004
61 / 81
8.5.1.2 Guest Start Time
Address 40 30. < MP >
Display for settings:
LED 40 30 (wait)
LCD USER SETTINGS→START TIME→30-START (wait)
HOUR:
Change for settings:
LED 40 30 <HHMM> "√"
LCD USER SETTINGS→START TIME→30-START
HOUR:<HHMM>
Shown/Entered value: HH=hour, MM=minute, number
Factory default: 00:00
8.5.2. Finish Time
After adjusted hour, the code of user and guest is deactivated.
8.5.2.1 User Finish Time
User 1 Finish Time
Address 41 01. < MP >
Display for settings:
LED 41 01 (wait)
LCD USER SETTINGS→FINISH TIME→01-FINISH (wait)
HOUR:
Change for settings:
LED 41 01 <HHMM> "√"
LCD USER SETTINGS→FINISH TIME→01-FINISH
HOUR:<HHMM>
Shown/Entered value: HH=hour, MM=minute, number
Factory default: 23:59
Example: To set Finish time of User 1 to 21:05 do.
41 01 2 1 0 5 √
User 2...29 Finish Time
Address 41 02...41 29. < MP >
Factory default: 23:59
8.5.2.2 Guest Finish Time
Address 41 30. < MP >
Display for settings:
LED 41 30 (wait)
LCD USER SETTINGS→FINISH TIME→30-FINISH (wait)
HOUR:
Change for settings:
LED 41 30 <HHMM> "√"
LCD USER SETTINGS→FINISH TIME→30-FINISH
HOUR:<HHMM>
Shown/Entered value: HH=hour, MM=minute, number
Factory default: 23:59
8.5.3. Days
User can only activate on selected days.