Teknim VAP416 - Event Codes

VAP416 Installation & Operation Manual
TD-1/07-004
70 / 81
Event
Address
LCD Menu
Cross Zone Fault
51 12
12-CROSS FAULT
Battery Low
51 13
13-LOW BATTERY
Line Fail
51 14
14-LINE FAIL
Battery Fail
51 15
15-BATTERY FAIL
Communication Fail
51 16
16-COM FAIL
Special Disarm
51 17
17-SPCIAL DISRM
Disarmed
51 18
18-DISARMED
Bypassed
51 19
19-BYPASSED
Entering Program
51 20
20-PROG BEGIN
Exiting Program
51 21
21-PROG END
Periodic Report
51 22
22-PER. REPORT
Panel Restarted
51 23
23-PANEL RESTART
Manual Report
51 24
24-MANUAL TEST
Phone Arm/Disarm
51 25
25-PHONE DISARM
PC Arm/Disarm
51 26
26-DISARM BY PC
Remote Access
51 27
27-REMOTE CONN.
Parallel Line Intruder
51 28
28-LINE INTRUS.
Custom Zone Alarm
51 30
30-CUSTOM EVENT
Defaults Loaded
51 32
32-DEFS LOADED
Intruder Alarm Restored
-
-
Panic Alarm Restored
-
-
Fire Alarm Restored
-
-
Duress Alarm Restored
-
-
Sabotage/Tamper Alarm Restored
-
-
Medical Alarm Restored
-
-
AC Restored
-
-
Battery Restored
-
-
Phone Line Restored
-
-
Battery Connected/Restored
-
-
Special Armed
-
-
Alarm Armed
-
-
Bypass Canceled
-
-
Custom Zone Alarm Restored
-
-
8.7.3. Event Codes
The codes of the events can be change for Contact ID. If the codes of the central
monitor station are different, please change the codes.
Intruder Alarm Code
Address 52 01. < IP >
Display for settings:
LED 52 01 (wait)
LCD COMMUNICATOR→CONTACT ID CODES→01-INTRUDER ALARM (wait)
Change for settings:
LED 52 01 <Value> "√"
LCD COMMUNICATOR→CONTACT ID CODES→01-INTRUDER ALARM
<Value>
Shown/Entered value: <Value>, Event code. 4 digit number