Teknim VAP416 - 8.8. Optional Modules

VAP416 Installation & Operation Manual
TD-1/07-004
73 / 81
Event
Parameters
37
Intruder Alarm Restored
[AB]:Zone
38
Panic Alarm Restored
[AB]:Zone
41
Fire Alarm Restored
[AB]:Zone
42
Duress Alarm Restored
-
45
Sabotage Alarm Restored
-
46
Medical Alarm Restored
-
47
Zone Trouble Restored
-
49
AC Restored
A:4(Quick Arm), B:Part.
A:5(No Activity), B:-
A:6(Automatic), B:-
A:7(Key) , B:-
A:8(Remote Ctrl.), B:-
50
Battery Restored
[AB]:User
51
Phone Line Restored
[AB]:Zone
57
Battery Restored
[AB]:User
58
Special Arming
[AB]:User
59
Alarm Armed
[AB]:User
99:PC Access
60
Bypass Canceled
-
62
Phone Armed
[AB]:Zone
The zone number is used as parameter for zone events. If the zone parameter is
user, user number is used for the parameter (0=Engineer, 1=Master,
2=1.User...30=29.User, 31=Guest).
8.8. OPTIONAL MODULES
8.8.1. RF Remote Control Module
Installer can enable or disable RF module. Meaning of option is in the following table.
Option
ON
OFF
Remote Control Module
1
Yes
No
Siren alarm on Panic
2
Play
Don't Play
Wireless detector enable
3
Yes
No
Address 60 01. < IP >
Display for settings:
LED 60 01 (wait)
LCD MODULES→REM. CONT. OPTNS→REM. CONT. OPTNS (wait)
Change for settings:
LED 60 01 <Value> "√"
LCD MODULES→REM. CONT. OPTNS→REM. CONT. OPTNS
<Value>
Shown/Entered value: <Value>, 1...3 multi selection from the table
Factory default: Nothing selected
Example: To enable RF remote control module do.
60 01 1 (turn on) √
8.8.2. Supervisory Interval
The signal which wireless detectors send to the alarm panel periodically as "no
problem" is supervisory signal. The timing can be adjust as hour.