o Change Installer Code
LED, LCD √ (long)(Password) 9 9 9 9 3 3 3 3 3 3 3 3 √ New code= 3333
Default Installer code = 9999
o Enter Master Program
LED, LCD 4 (long)(Program) 1 2 3 4 Default Master Code = 1234
Program Light flashes in LED Keypad and displays “MASTER MENU” on LCD Keypad.
o Assign User Code
5 user codes + 1 Guest code can be entered.
LED 07 01 X X X X √ 4 digit code = XXXX
07 02 ........... √
. .
. .
07 06 ........... √ (Guest code )
LCD 0-BASIC SETTINGS→ USER CODES→ 01-USER CODE
X X X X √
. .
0-BASIC SETTINGS→ USER CODES→ 06-USER CODE
X X X X √ (Guest code)
o Assign Duress Code
LED 07 07 X X X X √ 4 digit code = XXXX
LCD 0-BASIC SETTINGS→ USER CODES→ 07-USER CODE
X X X X √
o Change PC Connection Code
LED 07 08 X X X X √ Default PC Connection Code = 7777
LCD 0-BASIC SETTINGS→ USER CODES→ 08-USER CODE
X X X X √
o Exit Master Program
LED, LCD Press X (Exit) (long)
o Change Master Code Default Master Code = 1234
LED, LCD Press √ (Password) (long) 1 2 3 4 4 5 6 7 4 5 6 7 √
New Code=4567
o Test Siren
LED,LCD Press 8 (Test) (long) 3 1
o Test User Phone Number
LED, LCD First Number
Press 8 (Test) (long) 2 1
Second Number
Press 8(Test) (long) 2 2
.
.
Sixth Number
8 (long)(Test) 2 6
o Test Central Monitoring Station(CMS) Numbers
LED, LCD Press 8(Test) (long) 1 1 ; CMS-1 1.phone number test
Press 8(Test) (long) 1 2 ; CMS-2 1.phone number test
Press 8(Test) (long) 1 3 ; CMS-1 2.phone number test
Press 8(Test) (long) 1 4 ; CMS-2 2.phone number test
NOTE:
Zone settings are configured from addresses of 20
0X, 21 0X, 22 0X, 23 0X. ( X = Zone Number)
Enter delays are configured from addresses of 02
0X, exit delays are configured from addresses of
03 0X (X = Partition number).
All addresses can be seen in 5.5 Programming
Addresses.
To Next Page
Loading...
