o User-5 Keypads
Address = 44 05 < MP >
Default Value : 1 = ON, 2 = ON, 3 = ON, 4 = ON
o Guest Keypads
Address = 44 06 . < MP >
Default Value : 1 = ON, 2 = ON, 3 = ON
8.5.6. User Limitations
User permissions can be limited by the following addresses. Third and fourth options are only for Guest.
o User-1 Limitations
Address= 45 01 < MP >
To see value :
LED 45 01 (wait)
LCD 4-USER SETTINGS → LIMITATIONS → 01-LIMITATIONS (wait)
To change value :
LED 45 01 S ........S √
LCD E-USER SETTINGS → LIMITATIONS → 01-LIMITATIONS
S ........S √
S = Multi choice selection (1, 2, 3, 4)
Default Value : 1=OFF, 2= OFF, 3= OFF, 4=OFF
Example : To cancel Disarm permission of User-1 do
“ 45 01 2 (ON) √ “
o User Limitations of User2 to User5
Address : 45 02-05 < MP >
Default Value : All selections are OFF
o Guest User Limitations
Address : 45 06 < MP >
Default Value : 4 = 0N (Daily Code)
8.6. CENTRAL MONITORING STATION & USER PHONE DIALER SETTINGS
8.6.1. General Features
o Main Settings
Installer address of 50 01 includes main settings of dialing. Meanings of options are in the following table.
Users can end dialing by only pressing (*) from phone if 6.option is selected. (This feature operates when
panel calls user),user can not control or learn status of panel at this moment. Sirens continues to alarm even
if user press (*).
To Next Page
Loading...
