o User-1 Start Time
Address = 40 01 < MP >
To see value :
LED 40 01 (wait)
LCD 4-USER SETTINGS → START TIME → 01-START (wait)
TIME:
To change value :
LED 40 01 HH MM √
LCD 4-USER SETTINGS → START TIME → 01-START
TIME: HH MM √
HH = hours, MM = minutes
Default Value : 00:00
Example : To set Start time of User-1 to 08:00 do 40 01 08 00 √
o User-2 Start Time
Address = 40 02 < MP >
Default Value : 00:00
o User-3 Start Time
Address = 40 03 < MP >
Default Value : 00:00
o User-4 Start Time
Address = 40 04 < MP >
Default Value : 00:00
o User-5 Start Time
Address = 40 05 < MP >
Default Value : 00:00
o Guest Start Time
Address = 40 06 < MP >
Default Value : 00:00
8.5.2. Finish Time
Arm/Disarm permission of user ends in Finish Time
o User-1 Finish Time
Address = 41 01 < MP >
To see value :
LED 41 01 (wait)
LCD 4-USER SETTINGS →FINISH TIME → FINISH (wait)
TIME:
To change value :
LED 41 01 HH MM √
LCD 4-USER SETTINGS →FINISH TIME → FINISH
TIME: HH MM √
HH = hours, MM = minutes
Default Value : 00:00
Example : To set Finish Time of User-1 to 18:00 do “ 41 01 18 00 √ “
o User-2 Finish Time
Address = 41 02 < MP >
Default Value : 00:00
o User-3 Finish Time
Address = 41 03 < MP >
Default Value : 00:00
o User-4 Finish Time
To Next Page
Loading...
