1. INTRODUCTION
VAP404 is 4+4 zone alarm panel that meets desires. It has simple usage also let technician to configure user
needs simply.
Simple Mounting
o Panel is mounted wall by three holes.
o Panel case has cable holes to pass cables through Panel PCB.
o Functions of terminals is written on PCB. Connect cables to proper place.
o Connect telephone lines
o Connect Battery and AC Power
Simple Maintenance
o Device monitors troubles instantly.
o Test feature provides simple maintenance.
o 256 events are hold in memory.
o Battery doesn’t need maintenance.
Simple Programming
o Programming addresses are grouped by feature.
o Installer can configure panel, only by setting user codes, phone numbers.
o All settings can be configured or can be downloaded to computer, by using PC software and connection
cable,
Simple Usage
o Simply arm/disarm panel by entering code.
o Smart Partition Technology provides quick arming.
o Arm/Disarm by Remote controller.
o Arm/Disarm by Telephone
o Arm/Disarm by Key.
o Automatic Arm/Disarm feature by Timers.
Simple Automation
o When panel is armed, ARM output activates and can be used control anything.
o PGM outputs can be activated by timers.
o PGM outputs can be activated by assigned zones or partitions to PGMs.
o PGM outputs can be used as ARM or SRN output.
o PGM outputs can be activated on condition of fire or can be used to reset fire detectors.
o PGM outputs can be controlled by Telephone.
o PGM outputs can be controlled by Keypad.
Simple Management
o Time limit can be assigned to users
o Users can arm specific partitions.
o Users keypads can be selected.
Smart Partition Technology
o Without creating partition , zones are assigned to partitions defined before. Doors are assigned to C
Button, windows are assigned to B Button, interior zones are assigned to A Button , exterior zones are
assigned to D Button.
o Doors are armed with C Button ,windows are armed with B button quickly.
o You can arm zones except interior zones when you are in home by using A Button ,
o You can fully arm panel by using D Button.
To Next Page
Loading...
