Teknim VAP404 - Features

TD-1/07-008
6 / 83
2. FEATURES
Inputs
o Programmable 4+4 zone
o NC,NO, 1-EOL Resistor, 2-EOL Resistor zones, Double Zone.
o Different zone types (Door, Window, Tamper, Fire etc.)
o Additional features assigned zones(Follower zone, end zone, silent zone etc)
o Enter/Exit delays for each partition.
o KEY input to arm
o Sabotage switch on Panel and Keypad
Outputs
o Programmable outputs (NC, NO)
o Siren Output; SRN (NC, NO, cutoff time)
o ARM Output (NC, NO)
Siren
o Outdoor or Indoor can be connected
o Adjustable cutoff time(2255 minutes)
Keypad
o Can be used with 4 Keypads(max)
o Addressable Keypads
o LED or LCD Keypads can be used together
o Programmable backlight
o Displays event logs
o Displays Ready, Armed, Trouble, Fire status
o Shortcut buttons like Test, Report, Memory.
o Only displays zones assigned to Keypads
o Chime option
o Keypad Dimensions: 150mm(width) x 120mm (Length) x 22mm (Height)
General Features
o 5 user codes,1 Master code, 1 installer code, 1 Guest code, 1 Ambush code, 1 PC Connection Code
o Real time clock
o 256 event logs
o 6 user phone numbers
o Communicator supports 2 Central Monitoring Stations (Contact ID, 4+2,4+1,3+2,3+1 (DTMF) )
o Each Central Monitoring Station has 2 phone numbers
o Manuel and Automatic Bypass
o Smart Partition Technology
o PC connection by USB or COM Port
o 2 Timers
o PGM outputs can be controlled by telephone
Types of Arming/Disarming Panel
o Arm with single button
o Arm/Disarm specific partitions
o Automatic Arm/Disarm panel in the specific time.
o Arm/Disarm with KEY Input
o Arm/Disarm with remote control unit(Remote control module must be connected to Panel)
o Arm/Disarm by telephone
Alarm Types
o Siren Alarm: siren alarms, panel dials user and Central Monitoring Station
o Silent Alarm: siren doesn’t alarm, panel dials user and Central Monitoring Station.
Electrical & Mechanical Features
o 220230V AC Voltage
o Fuse AC Voltage(125mA)
o Power supply for external units with electronic fuses
o 12V DC Current Output(Siren + AUX + Keypad) : 1A (max)
o Current limited battery charge circuit
o 2 x 12V 7Ah battery can be connected.
o PGM1, PGM2, ARM output current:: 300mA max. Total current output of PGM1,PGM2, ARM: 500mA max.
o SRN output current:: 500mA max.
o Dimensions: 310mm(width) x 302mm (Length) x 83mm (Height)
o Weight( ± 2 gr) : 2785 gr / 3095 gr (Packaged)
Optional Modules
o Voice recording module, Voice message module (includes 8 messages), Remote Control module, 4-zone expansion module,
RS-232 PC link module, USB PC link module, Relay module, X-10 module, Network module, Modem module.