Teknim VAP404 - Page 76

TD-1/07-008
76 / 83
Keypad warning beeps can be closed in this address. Meaning of options is in the following.
1. Option = Exit Delay beep, 2. option = Arm beep , 3.option = Alarm beep,
4. Option = Trouble beep, 5. option = Button click beep, 6.option = Confirmation beep
< IP, MP >
To see value :
LCD 3-KEYPAD SETTING → CUSTOMISE → SOUND OPTION (wait)
To change value :
LCD 3-KEYPAD SETTING → CUSTOMISE → SOUND OPTION
S ........S √
S = Multiple choice selection
Default Value : All beeps are active
Example : To silent Button click do
LCD 3-KEYPAD SETTING→ CUSTOMISE→ SOUND OPTIONS
5 (OFF) √
o Trouble Beeps
Trouble beeps can be closed in this address. Meaning of options is in the following.
1. option= AC fail, 2. option = Low Battery ,3. option=Time-date loss,
4.option = Telephone Line fail 5. option = Zone trouble 6.option = Battery loss
< IP, MP >
To see value :
LCD 3-KEYPAD SETTING → CUSTOMISE → TROUBLE OPTN (wait)
To change value :
LCD 3-KEYPAD SETTING → CUSTOMISE → TROUBLE OPTN
S ........S √
S = Multiple choice selection
Default value : All beeps are active
Example : To silent telephone line fail do
LCD 3-KEYPAD SETTING→ CUSTOMISE→ TROUBLE OPTN
4 (OFF) √
o Language Selection
Language of LCD Screen is configured in this address.
< IP, MP >
To see value :
LCD 3-KEYPAD SETTING → CUSTOMISE → LANGUAGE (wait)
To change value :
LCD 3-KEYPAD SETTING → CUSTOMISE → LANGUAGE
[XXXXXXXXX] √
Press B(left) and C(right) buttons to select language.
o Thermometer Setting
Calibration of thermometer value is made in this address. This value is calibrated as a default.
< IP, MP >
To see value :
LCD 3-KEYPAD SETTING → CUSTOMISE → TEMP CALIB. (wait)
To change value :
LCD 3-KEYPAD SETTING → CUSTOMISE→ TEMP CALIB.
R R R √
RRR Calibration value( 0 ~ 255)
Default Value : 10
Example: To set calibration value as 9 do
LCD 3-KEYPAD SETTING→ CUSTOMISE→ TEMP CALIB.
9 √