Get Acquainted w
ith the Instrument
26. USB 2.0 host port. Insert a USB
cable here to connect peripherals to
the oscillosc
ope, such as a keyboard,
a printer, or a flash drive. There is one
more USB 2.0 host port on the rear
panel.
27. S ave. Push t
o perform an immediate
save operation. The save operation uses
the current save parameters, as defined
in the Save /
Recall menu.
28. Default Se
tup. Push to perform an
immediate restore of the oscilloscope to
the default settings.
29. D15 - D0. Push to display or remove the
digital channels from the display, and to
access th
e digital channel setup menu
(MSO3000 Series only).
36 MSO3000 and DP O3000 Series Oscilloscopes User Manual
To Next Page
Loading...
