224
Option Installation
Access this command from the Utilities menu.
Overview
Use Option Installation to enable upgrades that you have purchased for your instrument from
Tektronix. For the most current list of upgrades, go to www.tek.com or contact your local
Tektronix representative.
To Use
Click Continue in the first dialog box. Enter the Option Installation Key provided by Tektronix in
the Current Option Information dialog box. Click Continue again and follow the instructions to
install the option. Further instructions and information may be available with the option or
application documentation.
Behavior
Information about installed options and applications is listed in the installation dialog box. The
installation is acknowledged when complete.
To run external applications after installation, select the File menu Run Application submenu,
and select the application name from the drop-down list.
Tek Secure Erase
Access this command from the Utilities menu.
Overview
Use Tek Secure Erase to erase all
waveforms and instrument setups.
To Use
Click OK to erase, or Cancel to exit the
dialog box.
Behavior
Tek Secure Erase removes all reference waveform and instrument setup memory locations. Erased
setups are replaced with the default factory setups. This is useful if you are using the instrument to
gather sensitive or secure data.
To Next Page
Loading...
Need help?
General
