Set the maximum number of attempts to transmit an event to a
central station or to an individual user in this menu. After the com-
municator is reset, the default value is 4. After listing in order of
priority the 4 Destinations, the dialling attempts are renewed after
listing the 4 destinations in a priority order, set in the “Max At-
tempt” parameter is reached, by enumerating according to the
transmission priority.
Example 1:
Three telephone numbers for sending event messages are introduced in the commu-
nicator (i.e. the messages shall be sent to three separate Destinations), which are se-
lected by different priority (preset in the 2)Destinations submenu).
The parameters “Dest Attempt” - 02 and “Max Attempt” – 04 are set. This means
that each of the telephone numbers shall be initially dialled twice and if unanswered by
the respective telephone number up to four more times.
Phone 1
Phone 2
Phone 3
Priority/
Destination
1 1 3
Under such scheme of organization the communicator shall begin to dial the preset tel-
ephone numbers according to their priority:
1
, 2 , 1 , 2 , 3 , 3
1 , 2 , 3 ,1 , 2 , 3
The rst row of attempts is dependant on the “Dest Attempt” parameter and the
second on the “Max Attempt” parameter.
NOTE: The telephone numbers 1 and 2 are with Destination 1, which means that
the messages are transmitter via SIA or ContactID protocol to a monitoring
station. The telephone number 3 is with Destination 3 which means transmitting
directly to a User by a User protocol.
Example 2:
Let us use the same example but with preset parameters of “Dest Attempt” - 04 and
“Max Attempt” - 04. This means that each of the telephone numbers shall be se-
lected initially four times depending on its priority and if unanswered by the respective
telephone number up to four more 4 times.
Under such scheme of organization the communicator shall begin to dial the preset tel-
ephone numbers according to their priority:
1
, 2 , 1 , 2 , 1 , 2 , 1 , 2 , 3 , 3 , 3 , 3
1 , 2 , 3 ,1 , 2 , 3 ,1 , 2 , 3 ,1 , 2 , 3
Example 3:
Given the preset parameters of “Dest Attempt” - 01 and “Max Attempt” - 04, the
following shall be selected in sequence:
1
, 2 , 3 ,1 , 2 , 3 ,1 , 2 , 3 ,1 , 2 , 3
The telephone number is dialled only where a number and protocol have
been set.
2)Max Attempt
To Next Page
Loading...
