FACTORY RESET
When you perform a factory reset you reset network settings and all configurations. Press and hold
the reset button before switching on the power of the charging case. Hold the reset button until the
status LED turns blue. Release the reset button to reboot the charging case in fallback mode.
In fallback mode, the web server will have reduced functionalities. You are only able to upload an update
file. After reboot, the web server will have all functionalities again. Now, upload the update file again to
complete the update process of the firmware. After the final reboot, you can create new configurations.
LING UA CHARG ING CASE 32
To Next Page
Loading...
