CONFIGURE TRANSMITTER NETWORK
SETTINGS
Network Information
On the Network page you can configure the following parameters:
Parameter Description
Hostname The name you want to give to the Lingua IR system
MAC address The MAC address of the transmitter
IP address The IP address to access the transmitter, the default value is
192.168.0.140
. When you change the IP address of the transmitter, the
page automatically reloads using the new IP address.
Subnet mask Default subnet is 255.255.255.0
Gateway The access point to another network.
Figure 5-1 Network information page
CONFIG URE TR ANSMITTER NETWO RK SETTING S 7 3
To Next Page
Loading...
