Configure Audio Channels
In the Audio channels section you can add or remove audio channels. Per channel you can set the text to
be displayed on the receiver as well as which Dante™ channel is routed on that channel. Click Save
settings to confirm the configuration.
Figure 4-2 Transmitter audio settings (part two)
Beware that you cannot add more channels than specified in your license.
Import / Export Audio Configuration
It is possible to import and export audio configuration settings. Define the Configuration name and click
Save configuration name to confirm. Click Export current audio configuration to export the settings
or Import audio configuration to import settings.
CONFIG URE TR ANSMITTER AUDIO SETTING S 72
To Next Page
Loading...
