Televic LINGUA IR - Configure IP Settings

CONFIGURE IP SETTINGS
Before you start using the Lingua IR web server you need to configure your local IP settings to be able to
access the web server. Follow the procedure below to configure this.
To be able to access the web server your computer needs an IP address and subnet mask that can access
the IP address of the engine. The default IP address of the transmitter is 192.168.0.140 and of charging
case 192.168.0.150, which means the computer should have an IP address that is within the same subnet,
like 192.168.0.200. The subnet mask must be the same for all equipment on the network, being
255.255.255.0.
Change IP Settings In Windows
1.
Go to Control panel.
2.
Click Network and Internet and then Network and sharing center.
CONFIG URE IP SETTINGS 63