5.
Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
6.
To assign a fixed IP address to your computer, click Advanced.
7.
Click Add in the IP address pane.
8. Enter an IP address in the range of the transmitter and charging case, for example 192.168.0.26. Fill
in 255.255.255.0 as subnet mask.
When you use mulyiple networks on your computer (for example when your computer is
connected to the Internet via WIFI, and it is connected to a central engine using a network
cable), do not fill in the default gateway.
9.
Click OK. You are now ready to access the Lingua IR system.
CONFIG URE IP SETTINGS 65
To Next Page
Loading...
