TCS5500
Page | 17
Channel selectors, voting panels & loudspeakers
LS5500 : Loudspeaker.
DCSL5500 : Delegate channel selector with LCD backlighting.
MMP5500 : Microphone management and message panel.*
LCP5500 : Level control panel.
V3P5500 : Voting Panel with 3 buttons.
V5P5500 : Voting Panel with 5 buttons.
V3B5500 : Voting Panel with 3 buttons and badge.
V5B5500 : Voting Panel with 5 buttons and badge.
VTP5500 : Voting Panel with 3 buttons*.
VFP5500 : Voting Panel with 5 buttons*.
VTB5500 : Voting Panel with 3 buttons and badge*.
VFB5500 : Voting Panel with 5 buttons and badge*.
At the bottom you find an 8-pin shielded modular RJ-45 connector,
a connection is made with the DCS-output of the interface with a
DCS cable.
Custom built versions are available upon request.
On each channel selector a 3,5mm jack socket can be used to listen
to the specified channel with a headphone.
* The VTP5500, VFP5500, VTB5500 and VFB5500 are intended
for use in combination with a channel selector and have to be
connected to a DCSL5500. They have a DCS interface instead of
an INT interface. At the bottom you find a 6 pin and 14 pin micro
match connector, use a flat cable to connect these voting panels to
the channel selector.
* MMP5500 not compatible with INT5500 DSP ≥ 2.06
To Next Page
Loading...
