Page | 26
PC TIS: PC control suite INTSYS (interpreter
management) running and connected to the
CPU5500
FTP: FTP session open
TELNET: TELNET session open
CAMERA: camera option selected
OP.DESK: operator desk option selected
4. F1 menu button
5. F2 menu button
6. F3 menu button
7. LCD display
8. Scroll wheel
9. ENTER menu button
10. EXIT menu button
11. POWER switch with switch positions I and O
12. Mains connector plug
13. Fuse holder
14. Power supply fan with removable filter
15. Expansion board bay
16. Keyboard connector: service applications only
17. Serial Port COM1 connector
The RS232 connectors can be used to connect the
CPU5500 with a camera control system or an operator
desk
18. TMS Digital bus with 4x RJ-45 connectors (Port 1-4)
19. RJ-45 Ethernet connector can be used to connect the
central unit on an Ethernet network.
The control PC can also be connected on this Ethernet
network. The Ethernet connection is the standard
connection with a control PC. Only thru the operational
control suite, it is possible to use a point-to-point RS232
serial connection with a cross-cable connection.
To identify the CPU5500 in the Ethernet network each
CPU is provided with an IP address and an ID.
20. VGA connector: service applications only
21. TIS digital bus with 2x RJ-45 connector (Port 5-6)
22. CLOCK RJ-45 connectors
23. INFO RJ-45 connectors: not in use
To Next Page
Loading...
