Televic TCS5500 - Page 61

TCS5500
Page | 53
The limiter Gain is used to achieve a constant level of audio output
from the microphone. When the delegate raises or lowers his voice,
or changes the distance from the microphone, the level can change.
Therefore the limiter has to have a large range. However, when
there is use of a PA system, this can lead to Larsen. The user has to
seek a balance between the audio level of the floor channel and the
limiter setting.
Possible values of the limiter setting are:
 Gate = ON : limiter range is 32 dB with noise gate 4 dB
 Gate = OFF : limiter range is 32 dB without noise gate
 - 4 dB : limiter range is 28 dB without noise gate
 - 10 dB : limiter range is 22 dB without noise gate
 - 16 dB : limiter range is 16 dB without noise gate
 - 22 dB : limiter range is 10 dB without noise gate
 - 28 dB : limiter range is 4 dB without noise gate
Automatic gain reduction
0
2
4
6
8
10
12
14
16
18
20
1 2 3 4 5 6 7 8 9
# active microphones
gain reduction (dB)
1 2 3 4 5 6 7 8 9 0
Micro
2 Limiter Gain
Limiter Gain
President=Gate ON
Delegate =-4 dB