TCS5500
Page | 55
The Test Tone comes in useful when you are testing the
loudspeakers of the delegate units. Activate the Test Tone option
whenever you are not sure that the loudspeaker of a delegate unit is
working correctly.
The Test Units option will activate the LEDs of all delegate units
one by one in the sequence they were initialized. Once the test
sequence reaches the last unit, it will automatically restart the test.
The Test Units option is useful when you initialized the delegate
units and you want to test if there were all initialized correctly. The
delegate units will only activate when they are known to the
system.
The third item in the Options menu allows you to set the behavior
of the red signal ring on a delegate unit microphone during request.
You can choose to let the signal ring blink along with the green
request LED or you can choose to only let the green request LED
blink on the unit in request.
To Next Page
Loading...
