Page | 66
Loudspeaker channel: this option allows the loudspeaker
channel to be selectable or to be prefixed to the floor
channel selection or headphone channel selection.
Limiter Gain : The limiter is similar to the one used in
conference and can be used to adjust the level of ID5500
out :
Possible settings are
Gate = ON : limiter range is 32 dB with noise gate 4 dB
Gate = OFF : limiter range is 32 dB without noise gate
- 4 dB : limiter range is 28 dB without noise gate
- 10 dB : limiter range is 22 dB without noise gate
- 16 dB : limiter range is 16 dB without noise gate
- 22 dB : limiter range is 10 dB without noise gate
- 28 dB : limiter range is 4 dB without noise gate
Key speed/Repeat: this option allows to set the speed of
scrolling through the languages and the repeat speed is the
time before the scrolling begins.
Relay option: When "Enabled" is selected, then the relay
function is normal. When ""Off Transfert" is selected, then
no relay in transfer is possible. When "Disabled" is
selected, then no relay interpretation is possible.
LCD font: this option allows to change the font size of the
characters displayed on the LCD screen of the interpreter
desk.
Language overview: this option allows to enable or disable
the display of the available languages on the LCD screen of
the interpreter desk
VU meter: this option allows to enable or disable the
display of the VU meter function on the LCD screen of the
interpreter desk.
Info button: this option allows to enable or disable the
access to the INFO screen
Call button: this option allows to enable or disable the
intercom functionality
Chairman button: this button is currently not used. Future
implementation could be to assign a specific function to this
button..
Slow down button: this option allows to enable or disable
the Slow down button functionality. This slow down
function is to signal, when pressed, the chairman that the
speaker who has the floor, is speaking too fast.
To Next Page
Loading...
