Page | 82
1 Microphone – 1 voting panel
INT 5500
DML 5500
DML 5500
DML 5500
DML 5500
V5B 5500
V5B 5500
The V5P5500/ V3P5500/ V5B5500 and V3B5500 units have an
INT interface and can be directly connected to the DCS ports of the
INT5500. Voting panels can be equipped with a card reader.
1 Microphone – 1 channel selector – 1 voting panel
INT 5500
DML 5500
DML 5500
DML 5500
DML 5500
VFB 5500
DCSL 5500
The VFP5500/ VTP5500/ VFB5500 and VTB5500 voting panel
have a DCS interface and can be connected in combination with a
DCS unit using flat cables. The DCS unit is directly connected to a
DCS port of the INT5500. Voting panels can be equipped with a
card reader.
1 Microphone – 1 loudspeaker – 1 voting panel+badge
INT 5500
DML 5500
DML 5500
DML 5500
DML 5500
V5B 5500
LS 5500
This configuration associates a loudspeaker to each microphone in
combination with a voting panel + card reader. The voting panels
must have an INT interface for direct connection to the DCS ports
of the INT5500. The loudspeaker must be connected to the same
port number as the microphone. Then, the correct loudspeaker will