Appendix B
Installation manual to TCS5500 Appendix A ● 89
When the president microphone is deactivated, then the following
message is sent: %p00010131
If a delegate microphone is activated, and that delegate microphone
has the number ‘0003’ then the following message is sent:
%M00030110
When the delegate microphone is deactivated, then the following
message is sent: %m00030130
Suppose now that the delegate microphone with number ‘0003’ is
active. On a synchronization check the synchronization message
will look like this: %S00030116
Suppose now that the delegate microphones with number ‘0002’
and ‘0004’ are also active. On a synchronization check the
synchronization message will look like this: %000300020004029C
When no microphones are active, then the following
synchronization will be received: %S00000113
When the camera control system should reset itself to its start
position, then the following message will be received: %1r000052
When all microphones are deactivated simultaneously, then the
following message is received: %V00000116
To Next Page
Loading...
