19
Callback
To Place Automatic Callback on an Internal Extension:
1. Lift the handset and dial the desired extension or press a designated
DSS button.
If you hear a ring-no-answer or a busy tone:
2. Press the C
ALLBACK button (if set up) or
dial the Callback access code (2). Hear
the confirmation tone.
3. Hang up and wait for the callback’s
triple ring.
If the dialed party is forwarded to a destination:
Use the “COM” feature to override the
forward (see “Intercom (COM) Calling” on page 32).
To Reactivate Callback if you miss the Call:
Lift and replace the handset.
To Cancel Callback:
1. Lift the handset.
2. Dial the called extension number and hang up immediately.
Note:
“Callback” places an automatic callback on an internal extension. When it
occurs, the callback rings your extension in a triple ringing pattern.
When you answer, the system automatically calls the party back.
R HALEY
R HALEY CALLBACK
To Next Page
Loading...