55
Speed Dial (Changing Numbers)
To Change a Stored Speed Dial Number:
Method 1 - Using a Speed Dial button:
1. Lift the handset and press M
UTE/SAVE.
Hear the confirmation tone.
2. Press the S
PEED DIAL button followed
by a Speed Dial address (00-39). Hear
a short busy tone, followed by silence.
To change the current number: (continuing
after step 2)
3. Dial a new number.
4. Press M
UTE/SAVE.
Hear the confirmation tone, followed by a dial tone.
To erase the current number: (continuing after step 2)
3. Press M
UTE/SAVE without dialing any numbers. Hear the confirmation
tone, followed by a dial tone.
Note:
A short busy tone after dialing a Speed Dial address means there is
already a speed dial number stored at that location. You can replace or
erase this number, as shown above, or hang up to save it.
If you hear a confirmation tone, it means there is no speed dial number
stored at that location.
SELECT SAVE FUNCTION
OR PRESS MENU KEY
NUM?
NUM? 914155551212
SPEED INDEX:
NUM?