Teltronics ClearCom12 User Manual

36
Messaging (“No-Answer” Messages)
To Display a Short “No-Answer” Message for Callers When You Are
Away:
1. Press M
UTE/SAVE. Hear the confirmation
tone.
2. Press M
SG. Hear the confirmation tone.
3. Press a digit key from 2 to 6,
corresponding to the kind of message
you want to leave.
4. Enter the numbers for times and/or
dates. Use * for a colon (:) and # for a
dash (-).
5. Press M
UTE/SAVE. Hear the confirmation
tone.
To Cancel a “No-Answer” Message:
1. Follow steps 1 and 2 above.
2. Press option 1 (Erase).
Note:
Only those internal callers with an LCD display, including Attendant
Workstations, can see the “No Answer” message when they dial your
extension.
See the next page for examples of “No-Answer” messages you can leave
for callers.Examples of “No-Answer” Messages that can be displayed. See
Messaging (“No-Answer” Messages) for details.
1-ERASE 2-CALL 3-MTG
4-LUNCH 5-ABST 6-OUT
USE DIGIT OR
*
= :
#
= -
OUT TO LUNCH
12 JAN 00 12:20
OUT TO LUNCH
12:00 - 1:00
SELECT SAVE FUNCTION
OR PRESS MENU KEY

Teltronics ClearCom12 Specifications

General

Brand	Teltronics
Model	ClearCom12
Category	IP Phone
Language	English